Home  //  Kyoritsu Indonesia
  • Email us at : sales@kyoritsuindonesia.com

KEW 2007R

Fully Safety jaw,Ergonomic over-molded body gives convenient one-hand operationLarge easy-to-read display with 0.1A resolution,Accurate reading with True RMS 600/1000A auto-ranging.
 

KEW 1020R

Large display with 6000 counts and Backlight, True-RMS,MIN/MAX function,Rugged and reliable,Clamp sensor mode,IEC 61010-1 CAT IV 300V / CAT III 600V / CAT II 1000V.

KEW 2510

Measures 4 to 20 mA instrumentation and process signals without breaking the loop,Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding.
 

KEW 1062

High Accuracy, High Performance and Reliable Measurements,Safety design for industrial use,Reliable support for data management.
 

  • Tab 1

    KEW 3128 High Voltage Insulation Testers

    Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions,Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc,6 ranges: 500V, 1000V, 2500V,5000V,10000V,12000V,Fine adjustment of voltage setting at each range is also possible. Learn More...

     

  • Tab 2

    KEW 6315 Power Quality Analyzer

    Simultaneous Power & Power quality measurements,Helpful support functions,Measurement with high accuracy,Remote monitoring on PC and Android device,Various Clamp Current Sensors,Energy consumption check on site,IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V. Learn More...

     

  • Tab 3

    KEW 6016 Multi Function Testers

    Continuity Measurement,Insulation Measurement,Loop Impedance Measurement,PSC / PFC Measurement,RCD Measurement,Earth Measurement,Phase rotation,Voltage Measurement. Learn More...

     

Jual Earth Testers Kyoritsu Harga Murah

Earth Testers

  • MODEL 4102A

    MODEL 4102A

    • The latest circuit design permits the instrument to operate
     with the minimum of influence from earth voltage
     and earth resistance of auxiliary earth spikes.
    • Dust and drip proof. (designed to IEC 529 IP54)
    • Earth resistance value can be read directly from the scale.
    • Designed to meet IEC 61010-1 safety standard.
    • Capable of measuring earth voltage.
    • Small and lightweight. Shock resistant new case material.
    • 2mA measuring current permits earth resistance tests
     without tripping earth leakage current breakers
     in the circuit under test.
    • Lead wire connection to C and P terminals and proper
     auxiliary earth resistance can be checked by "OK" lamp.
     Lead wire connection to C and E terminals is good
     when "OK" lamp is illuminated.

    • MODEL 4105A

      MODEL 4105A

      • Dust and drip proof.(designed to IEC 529 IP54)
      • In addition to the facility for precision measurement, test leads for simplified two wire easuring system also supplied as standard accessories.
      (unit can be hung from the neck for simplified measurement)
      • Designed to meet IEC 61010-1 safety standard.
      • Capable of measuring earth voltage.
      • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
      • Small and lightweight. Shock resistant new case material.
      • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

      • KEW 4300

        KEW 4300

        KEW 4300 is simplified earth resistance tester
        (based on 2-pole method)
        • 200/2000Ω (2 ranges): auto-ranging.
        • Warning buzzer triggered at 100Ω or less.
        • LED lights up when a large earth voltage is detected.
        • Live circuit warning when 30V or higher voltage is detected.
        (KEW 4300 detects voltage even when measuring resistances.)
        • LED light for illuminating measurement points.
        (It turns on/off automatically in relation to the ambient brightness.)
        • Small test current (max 2mA) not triggering RCD.

        • TRUE RMS Backlight AutoPowerOff

Earth Resistance & Resistivity Tester

  • KEW 4106

    KEW 4106

    Earth Resistance Measurements with 4, 3 and 2 Wires
    Earth Resistivity (ρ) Measurement using WENNER method

    • Backlight

Earth Clamp Testers

  • MODEL 4200

    MODEL 4200

    • The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes. (The Multiple Earthing System.)
    • True RMS
    Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A
    • Noise Check Function
    A function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD.
    • Memory function
    Save and display up to 100 measurement data.
    • Data hold function / Buzzer function / Back light function
    • Compliant with Safety Standards of IEC 61010-1 : CAT IV 300V Pollution degree2

    • TRUE RMS φ32 Backlight

    • KEW 4202

      KEW 4202

      Various useful functions are available on Android devices using Bluetooth communication
      • Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements)
      • Saved data includes measurement, GPS location and date & time
      Easy to check on map "When" and "Where" the measurement was made
      • Comparator function on Android device informs when the measured value is lower/higher than the preset value

      Earth /Ground resistance and Leakage current measurement functions
      • The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems
      • True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
      • Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments

      • TRUE RMS φ32 Backlight Bluetooth

Jual High Voltage Insulation Testers KEW 3128

 

High Voltage Insulation Testers

KEW 3128

KEW 3128
CE AutoDischarge
 
• Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions.
• Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc.
• 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000V
Fine adjustment of voltage setting at each range is also possible
• Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight.
• Can be operated from built-in rechargeable battery or from AC line.
• Automatic discharge after test with monitoring of the discharge voltage.
• Internal memory can store about 43,000 data (max).
• Robust design for field use with IP64 rating (with lid closed).
  • CAT4　600V DCACV Backlight USB AutoPowerOff 500V 1000V 2500V 5000V 1KV~10KV 12KV External
 

Insulation resistance (*): Accuracy is not guaranteed with setting of 250V or less

Rated voltage 500V 1000V 2500V 5000V 10000V 12000V
Max measurement value 500GΩ 1TΩ 2.5TΩ 5TΩ 35TΩ
Accuracy 400k～50GΩ ±5%rdg±3dgt
(*)		 800k～100GΩ 5%rdg±3dgt 2M～250GΩ ±5%rdg±3dgt 4M～500GΩ ±5%rdg±3dgt 8M～1TΩ ±5%rdg±3dgt
50G～500GΩ
±20%rdg
(*)		 100G～1TΩ
±20%rdg		 250G～2.5TΩ
±20%rdg		 500G～5TΩ
±20%rdg		 1T～10TΩ
±20%rdg
10T - 35TΩ
Values are displayed, but accuracy isn't guaranteed
Short circuit current Max 5.0mA
Load resistor to output rated voltage 0.5MΩ or more 1MΩ or more 2.5MΩ or more 5MΩ or more 20MΩ or more 24MΩ or more

Output voltage

Rated voltage 500V 1000V 2500V 5000V 10000V 12000V
Monitor accuracy ±10%±20V ±10%±20V ±10%±20V ±10%±20V ±10%±20V ±10%±20V
Output accuracy 0 - +20% 0 - +10% 0 - +10% 0 - +10% -5 - +5% -5 - +5%
Selectable range 50 - 600V
(in steps of 5V)		 610 - 1200V (in steps of 10V) 1225 - 3000V (in steps of 25V) 3050 - 6000V (in steps of 50V) 6100 -
10000V (in steps of 100V)		 10100 - 12000V (in steps of 100V)

Voltage measurement

Measuring range DCV：±30 ～ ±600V、ACV：30 ～ 600V （50/60Hz）
Accuracy ±2%rdg±3dgt

Current measurement

Measuring range 5.00nA - 2.40mA (Depending on the insulation resistance)

Capacitance measurement

Measuring range 5.0nF ～ 50.0μF
(500V/1000V/2500V/5000V)		 5.0nF - 1.0µF (display range: 5.0nF - 50.0µF) (10000V/12000V)
Accuracy ±5%rdg±5dgt

General

Applicable standards IEC 61010-1 CAT IV 600V Pollution degree 2,
IEC 61010-031, IEC 61326, IEC 60529 (IP64): with the lid closed.
Operating temperature & humidity range -10ºC - Relative humidity 85% or less
50ºC /(when operating with an external power supply, no condensation)
0ºC - 40ºC /Relative humidity 85% or less
(when operating with battery, no condensation)
Storage temperature & humidity range -20ºC - 60ºC / Relative humidity 75% or less (no condensation)
Power source Rechargeable Lead storage battery (12V)*
Charging time: approx. 8 hours / AC Power supply (100V - 240V, 50/60Hz)
* Continuous measuring time:
approx. 4 hours
(a load of 100MΩ at the Insulation resistance 12000V Range.)
approx. 2 hours
(Max current consumption in range while rated currents are maintained.)
Dimensions 330 (L) × 410 (W) × 180 (D) mm *Instrument and Hard case
Weight 9kg approx. (including battery) *Instrument and Hard case
Included Accessories 7170 (Main cord), 7224A (Earth cord), 7225A (Guard cord), 7226A (Line probe),
7227A (Line probe with alligator clip), 8029 (Extension prod),
8212-USB-W (USB adaptor with KEW Windows (Software)),
Instruction manual
Optional Accessories 7254 (Longer Line probe with alligator clip)

 

Jual High Voltage Insulation Testers KEW 3126

 

High Voltage Insulation Testers

KEW 3126

KEW 3126
CE AutoDischarge
 
• Short-Circuit Current up to 5mA
• Wide range measurements from 500V to 5000V and up to 1TΩ
• Large digital display with Bar Graph indication and white LED back light
• Polarization Index measurement (PI), Dielectric Absorption Ratio (DAR)
• Filter function reduces noise interference for obtaining stable measurement
• Indication of Output voltage and Discharge voltage
• Auto-discharge function and Output voltage warning function
• Auto power off and Battery Indicator
• Safety standard IEC 61010-1 CAT III 600V
  • CAT3　600V DCACV Backlight AutoPowerOff 500V 1000V 2500V 5000V
 

Insulation resistance

Range 500V 1000V 2500V 5000V
Accuracy 0.0 - 99.9MΩ
100 - 999MΩ		 0.0 - 99.9MΩ
100 - 999MΩ
1.00 - 1.99GΩ		 0.0 - 99.9MΩ
100 - 999MΩ
1.00 - 9.99GΩ
10.0 - 99.9GΩ		 0.0 - 99.9MΩ
100 - 999MΩ
1.00 - 9.99GΩ
10.0 - 99.9GΩ
100 - 1000GΩ
(1TΩ)
±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt ±5%rdg±3dgt
±20%rdg
(100GΩ or more)
Short circuit current Max. 5mA
Rated test Current 1mA to 1.2mA
at 0.5MΩ load		 1mA to 1.2mA
at 1MΩ load		 1mA to 1.2mA
at 2.5MΩ load		 1mA to 1.2mA
at 5MΩ load
Open circuit voltage 500VDC
+30%
-0%		 1000VDC
+20%
-0%		 2500VDC
+20%
-0%		 5000VDC
+20%
-0%
Maximum display 999 Counts (1000 counts only at 1000GΩ)
Current consumption 1000mA approx. (During measurement)

Voltage measurement

Measuring range 30 - 600V AC/DC (50/60Hz)
Accuracy ±2%rdg±3dgt

Insulation resistance

Test voltage 500/1000/2500/5000V
Measuring ranges 0.0 - 99.9MΩ, 100 - 999MΩ (500V)
0.0 - 99.9MΩ, 100 - 999MΩ, 1.00 - 1.99GΩ (1000V)
0.0 - 99.9MΩ, 100 - 999MΩ, 1.00 - 9.99GΩ, 10.0 - 99.9GΩ (2500V)
0.0 - 99.9MΩ, 100 - 999MΩ, 1.00 - 9.99GΩ, 10.0 - 99.9GΩ, 100 - 1000GΩ (1TΩ) (5000V)
Accuracy ±5%rdg±3dgt (500/1000/2500V)
±5%rdg±3dgt, ±20%(100GΩ or more) (5000V)
Short circuit current Max. 5mA
Rated test current 1mA to 1.2mA at 0.5MΩ load (500V)
1mA to 1.2mA at 1MΩ load (1000V)
1mA to 1.2mA at 2.5MΩ load (2500V)
1mA to 1.2mA at 5MΩ load (5000V)
Open circuit voltage 500VDC+30%, -0% (500V)
1000VDC+20%, -0% (1000V)
2500VDC+20%, -0% (2500V)
5000VDC+20%, -0% (5000V)
Maximum display 999 Counts (1000 counts only at 1000GΩ)
Current consumption 1000mA approx. (During measurement)

Voltage measurement

Measuring ranges 30 - 600V
AC/DC
(50/60Hz)
Accuracy ±2%rdg
±3dgt
Maximum display 630 Counts
Current consumption 110mA approx.

General

Applicable standards IEC 61010-1 CAT III 600V Pollution degree 2
IEC 61010-031, IEC 61326
Power source DC12V : LR14×8 pcs.
Dimensions 205(L) × 152(W) × 94(D)mm
Weight 1.8kg approx.
Included Accessories 7165A (Line probe), 7224A (Earth cord), 7225A (Guard cord)
8019 (Hook type prod), 9159 (Hard case)
LR14 (Alkaline battery size C) × 8, Instruction manual
Optional Accessories 7168A (Line probe with alligator clip)
7253 (Longer Line probe with alligator clip)
8302 (Adaptor for recorder)

 

Silahkan hubungi kami segera untuk pemesanan, di nomor-nomor sebagai berikut : 021-29478974 , 081289462227 , email : sales@kyoritsuindonesia.com

KYORITSU News

Clamp Sensors

Flexible Clamp Sensor KEW 8130 • Ø110mm • Can measure AC current up to 1000A • Flexible and light weight by the air core coil used at...

Others

Illuminometer MODEL 5201 • Digital Illuminometer • Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19,990 Lux, with auto...

KT 171

Jual Kyoritsu Voltage Testers KT 171   Voltage Testers KT 171   • AC and DC voltage tests up to 690V with LEDs and LCD • Comply with the...

KT 170

Jual Kyoritsu Voltage Testers KT 170   Voltage Testers KT 170     • AC and DC voltage tests up to 690V with LED • Comply with the latest standards...

Voltage Testers

Kyoritsu Indonesia - Jual Kyoritsu Voltage Testers Voltage Testers KT 170 • AC and DC voltage tests up to 690V with LED • Comply with the latest standards...

KEW 8031F

Jual Kyoritsu Phase Indicators KEW 8031F   Phase Indicators KEW 8031F   • KEW8031F is designed to check phase sequence. Lamps provided on the unit will also tell you if...

MODEL 8031

Jual Kyoritsu Phase Indicators MODEL 8031   Phase Indicators MODEL 8031   • Digital Phase Indicator with open phase checker. • Phase indicator designed to check the presence of open...

MODEL 8030

Jual Kyoritsu Phase Indicators MODEL 8030   Phase Indicators MODEL 8030   • Digital Phase Indicator with open phase checker • Phase indicator designed to check the presence of open...

KEW 8035

Jual Kyoritsu Non-Contact Safety Phase Indicator KEW 8035   Non-Contact Safety Phase Indicator KEW 8035   • New technology permits safe testing, without the need of direct contact between probes...

Phase Indicator

Kyoritsu Indonesia - Jual Kyoritsu Phase Indicator Non-Contact Safety Phase Indicator KEW 8035 Safe Testing without direct contact with live wires!! • New technology permits safe testing, without...

KEW 6201A

Jual Kyoritsu Portable Appliance Tester KEW 6201A   Portable Appliance Testers KEW 6201A   The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of...

KEW 4140

Jual Kyoritsu  LOOP/PFC/PSC Testers KEW 4140   LOOP/PFC/PSC Testers KEW 4140   • Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above. •...

MODEL 4118A

Jual Kyoritsu LOOP/PFC/PSC Testers MODEL 4118A   LOOP/PFC/PSC Testers MODEL 4118A     • Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status....

KEW 5410

Jual RCD Testers KEW 5410   RCD Testers KEW 5410   • Measurement of RCD trip time  Conducting testing of rated residual non-operating currents at  × 1/2 Range, measuring RCD...

MODEL 5406A

Jual Kyoritsu RCD Testers MODEL 5406A   RCD Testers MODEL 5406A   • Custom microprocessor controlled for highest accuracy and reliability. • 3 LEDs for checking correct wiring status. •...

KYORITSU Products

KYORITSU Video

Guests Online

We have 6 guests and no members online

Quality Control Concept

Voltage : Precision calibrators are used as in-house DC and AC voltage standards.
Current : DC or AC current is converted to a voltage by a standard resistor, and the voltage is calibrated with a precision digital multimeter.
Resistance : Calibration resisters are calibrated with a DC standard current generator and the precision digital multimeter. Learn More...