Flexible Clamp Sensor

• 

  KEW 8130

  • Ø110mm
  • Can measure AC current up to 1000A
  • Flexible and light weight by the air core coil used at the sensor part
  • Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V

  

• 

  KEW 8129

  • Ø150mm
  • Flexible for various test fields
  • Can measure AC current up to 3000A
  • Flexible and light weight by the air core coil used at the sensor part
  • Measurable conductor size: max Φ150mm
  • Designed to meet the international safety standard IEC 61010-1 CAT III 600V

  

Load current clamp sensors

• 

  KEW 8121

  • Ø24mm

  

• 

  KEW 8122

  • Ø40mm

  

• 

  KEW 8123

  • Ø55mm

  

• 

  MODEL 8124

  • Ø68mm

  

• 

  MODEL 8125

  • Ø40mm

  

• 

  MODEL 8126

  • Ø40mm

  

• 

  MODEL 8127

  • Ø24mm

  

• 

  MODEL 8128

  • Ø24mm

  

Leakage & Load current clamp sensors

• 

  KEW 8146

  • Ø24mm

  

• 

  KEW 8147

  • Ø40mm

  

• 

  KEW 8148

  • Ø68mm

  

Leakage current clamp sensors

• 

  MODEL 8141

  • Ø24mm

  

• 

  MODEL 8142

  • Ø40mm

  

• 

  MODEL 8143

  • Ø68mm

  

Voltage Sensor

• 

  KEW 8309

  Floating voltage can be measured

Clamp Sensors/Adaptors

• 

  KEW 8161

  • AC Clamp Sensor
  • KEW 8161 clamp Sensor is designed to be an AC current/voltage conversion probe capable of measuring AC current up to 100A in conjunction with digital multimeters

  

• 

  MODEL 8112

  • AC CLAMP ADAPTOR
  • Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters.
  Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.

  

• 

  MODEL 8112BNC

  • AC Clamp Adaptor
  • Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.

  

• 

  KEW 8115

  • Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
  • Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.

  

Multi-Trans