Jual Multi Function Testers Kyoritsu

Multi Function Testers

• 

  MODEL 6010A

  Continuity and Insulation Testing
  • Live circuit warning LED:
  Immediate illumination of a warning lamp if the circuit under test is live
  • Auto Discharge:
  Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
  • Integral overload protection on internal continuity and insulation test circuitry
  • Autoranging
  • 500V DC test voltage for insulation tests
  • 200mA short circuit current on continuity ranges
  
  Loop and RCD Testing
  • Wiring connection check LED's:
  Immediate indication if wiring of circuit under test is correct
  • Overheat Protection:
  Rapid detection of overheating of internal circuitry,display of warning signal to user and automatic halting of measurement
  • Supply Voltage Indication:
  Can display supply voltage value in loop impedance mode
  • Low Current Loop Impedance Test:
  Short duration low test current will prevent tripping of many passive RCDs
  • Auto Data Hold:
  Retains displayed reading for set period following test
  • Phase Angle Selection:
  Selection of test current from +ve or -ve half cycle of waveform can prevent tripping of polarized type RCDs

• 

  KEW 6010B

  • Continuity: 20/200Ω, 200mA Test Current
  • Insulation: 500/1000V, 20/200MΩ, 1mA Rated Test Current
  • Loop Impedance: 20/2000Ω, 15mA Test Current at 2000Ω (No RCD Trip)
  • RCD: 10/30/100/300/500mA x1/2, x1, Fast Trip(40ms), DC, Auto Ramp
  • Test of a large kind of RCD's:
  Standard, Selective, AC and A (DC sensitive breakers)
  • Uc (Contact Voltage): 100V
  • Designed to IEC 61010-1, IEC 61557
  • Data Memory: 300 measured results
  • The stored data can be transferred to PC via Optical Adaptor Model 8212-USB or 8212-RS232C.

• 

  MODEL 6011A

  • Complies with IEC 61557
  • Designed to IP 54 Rating
  • Live circuit and wiring connection check LED's
  • Triple ranges insulation tests at 250, 500 and 1000V
  • Triple range loop and PSC tests 15mA test current at 200Ω/2000Ω range (No RCD Trip)
  • Phase angle selection on RCD ranges
  • Polarity switch for continuity tests
  • Auto-null facility for continuity tests
  • Earth probe for loop impedance testing on extraneous metalwork
  • Contact Voltage Reading
  • Test of a large kind of RCD's:
  Standard, Selective, AC and A (DC sensitive breakers)

• 

  KEW 6016

  The KEW 6016 Multi-Function tester performs 10 functions
  in one instrument.
  • Continuity tester
  • Insulation resistance tester
  • Loop impedance tester
  • PSC tester
  • PFC tester
  • RCD tester
  • Earth tester
  • Phase rotation tester
  • Voltage measurement
  • Frequency measurement

• 

  MODEL 6018

  • Designed to meet IEC 61010-1 CAT III 600V
  • Test leads with remote control switch.
  (For insulation&Simplified Earth Test)
  • Back light function.
  • Color coded scales and range switch position for easy reading.
  • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
  • Can be hung around the neck for both hand’s operation.

PV Insulation Earth Tester