Clamp Sensors
Flexible Clamp Sensor
-
KEW 8130
• Ø110mm
• Can measure AC current up to 1000A
• Flexible and light weight by the air core coil used at the sensor part
• Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V
-
KEW 8129
• Ø150mm
• Flexible for various test fields
• Can measure AC current up to 3000A
• Flexible and light weight by the air core coil used at the sensor part
• Measurable conductor size: max Φ150mm
• Designed to meet the international safety standard IEC 61010-1 CAT III 600V
Load current clamp sensors
-
KEW 8121
• Ø24mm
-
KEW 8122
• Ø40mm
-
KEW 8123
• Ø55mm
-
MODEL 8124
• Ø68mm
-
MODEL 8125
• Ø40mm
-
MODEL 8126
• Ø40mm
-
MODEL 8127
• Ø24mm
-
MODEL 8128
• Ø24mm
Leakage & Load current clamp sensors
-
KEW 8146
• Ø24mm
-
KEW 8147
• Ø40mm
-
KEW 8148
• Ø68mm
Leakage current clamp sensors
-
MODEL 8141
• Ø24mm
-
MODEL 8142
• Ø40mm
-
MODEL 8143
• Ø68mm
Voltage Sensor
-
KEW 8309
Floating voltage can be measured
Clamp Sensors/Adaptors
-
KEW 8161
• AC Clamp Sensor
• KEW 8161 clamp Sensor is designed to be an AC current/voltage conversion probe capable of measuring AC current up to 100A in conjunction with digital multimeters 
-
MODEL 8112
• AC CLAMP ADAPTOR
• Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters.
Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
-
MODEL 8112BNC
• AC Clamp Adaptor
• Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112. -
KEW 8115
• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
Multi-Trans
MODEL 8008
• Adaptor designed to increase the measuring capability of your clamp meters.
• With the use of the multi-tran you can not only extend current ranges but also on a conductor of larger diameter.
Others
Illuminometer
-
MODEL 5201
• Digital Illuminometer
• Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19,990 Lux, with auto range switching.
• The digital display is held for a preset time (about 20 seconds) and, therefore, facilitates reading, recording and measuring in any direction.
Light Meter
-
MODEL 5202
• Digital Light Meter
• 3 ranges changeable from low to high illuminance. (200/2000/20000lux)
• Data hold function.
• Digital light meter with separate light recieving sensor and meter.
Infrared Thermometer
MODEL 5510
• Waterproof hand-held Infrared Thermometer.
• Safe even if getting wet. Dustproof and waterproof structure of IP67.
• Possible to wash
• Please feel secure to use the product on the spot, made from ABS resin of antibacterial specification.
• Shock-proof structure: No damage even if dropped from the height of 1m.
• With auto-power-off function, preventing consumption of the battery
• Wide Temperature Range of -40ºC to 300ºC
• Small and light: Possible to measure easily by one hand.
• Portable type: Convenient to carry
KT 171
Jual Kyoritsu Voltage Testers KT 171
Voltage Testers
KT 171
• AC and DC voltage tests up to 690V with LEDs and LCD
• Comply with the latest standards IEC 61243 and IEC 61010
• Novel design
Large and bright LEDs: Values are visible in the dark place
Ergonomic design fits in the hand
• Two functions are available in one model
"Measurement without battery" and "Self Test (all LED on)"
• Test leads withstand harsh environments at low temperature
• Penlight (white LED)
• Auto-power ON/OFF
• Audible indication
• Variable test tips, φ2mm or φ4mm
• Probe protection cover can store the attachment of caps
• IP65 (IEC 60529)
| Voltage Test | ||
|---|---|---|
| Voltage Range | 12 - 690V AC/DC | |
| LED | Nominal Voltage | 12/24/50/120/230/400/690V AC (16 - 400Hz), DC (±) |
| Tolerance (Threshold Voltage) |
Light on at more than: 7±3V (12V LED) 18±3V (24V LED) 37.5±4V (50V LED) 75%±5% of nominal voltage (120/230/400/690V LED) |
|
| Response Time | <0.6s at 100% of each nominal voltage | |
| LCD | Range/Resolution (Auto-range) |
300V AC/DC (6.0 - 299.9)/0.1V 690V AC (270 - 759)/1V 690V DC (270 - 710)/1V |
| Accuracy (23±5ºC) | ±1.5V (7 - 100V) ±1%±5dgt (100 - 690V) AC (16 - 400Hz), DC(±) |
|
| Overrange Indication | "OL" | |
| Response Time | Approx. 1s at 90% - 110% of each voltage | |
| Peak Current | ls<3.5mA (at 690V) | |
| Measurement Duty | 30s ON (operation time) 240s OFF (recovery time) |
|
| Single-Pole Phase Test | ||
| Voltage Range | 100 - 690V AC (50/60Hz) | |
| Phase Rotation Test | ||
| System | Three-phase 4-wire system 200 - 690V phase-to-phase AC (50/60Hz) |
|
| Phase Range | 120±5 degree | |
| Continuity Test | ||
| Detection Range | 0 - 400kΩ+50% | |
| Test Current | Approx. 1.5μA (battery 3V, 0Ω) | |
| Applicable standards | IEC 61243-3, IEC 61010-1, IEC 61010-031, IEC 61557-7 CAT Ⅲ 690V / CAT Ⅳ 600V Pollution degree 2 |
|---|---|
| IP Rating | IP65 (IEC 60529) |
| Operating temperature & humidity range | -15 - 55ºC, max 85% RH (No Condensation) |
| Storage temperature & humidity range | -20 - 60ºC, max 85% RH (No Condensation) |
| Power source | LR03 (AAA) 1.5V×2 |
| Dimensions | 246(L)×64(W)×26(D) mm |
| Weight | 190g (including batteries) |
| Included Accessories | LR03 (AAA) 1.5V×2, KTA01 (4mm metal tips [2pcs/set]), KTA02 (4mm rubber caps [2pcs/set]), Instruction manual |
KYORITSU Products
Guests Online
We have 33 guests and no members online
Call us at:
Email us at:
