Home  //  Products  //  Clamp Meters  //  MODEL 2608A  //  Kyoritsu Indonesia
  • Email us at : sales@kyoritsuindonesia.com

KEW 2204R

  • Print
Details
Category: Kyoritsu Indonesia
Published on Tuesday, 20 September 2016 10:40
Written by Super User
Hits: 1457

AC Digital Clamp Meters

KEW 2204R NEW

 

KEW 2204R
CE
 
• Flexible and light weight clamp sensor
• MIN MAX function
• Backlight LCD display
• IEC 61010-1 (CAT IV 600V /CAT III 1000V)
• True RMS

TRUE RMS CAT4　600V φ70 MAX400A ACA AutoPowerOff MAX/MIN DATAHOLD Backlight

AC A (RMS)
　Range 4.000/40.00/400.0A
Accuracy ±3%rdg±5dgt[45-500Hz]
(At the center of the circle formed by the flexible sensor)
Crest factor
(CF)		 Full scale CF<1.6, half scale<3.2
Effective input crest values are √2 times of the max values of each range.
Conductor size Ø70mm max.
Influence of
Conductor position		 Additional ±2% (max.) depending on the distance from the center position
Overload protection 500A AC for 10 seconds
Applicable standards IEC 61010-1, IEC 61010-2-032
CAT Ⅳ 600V / CAT Ⅲ 1000V Pollution degree 2
IEC 61326-1(EMC) , IEC 60529 IP40 , EN50581(RoHS)
Operating temperature
& humidity		 0 - +50℃,less than 80% RH (without condensation)
Storage temperature
& humidity		 -10 - +60℃,less than 70% RH (without condensation)
Power source R03 / LR03(AAA)(1.5V)×2
※Continuous measuring time：approx.120hours
(Auto power off：approx.15 minutes)
Dimensions 120(L)×70(W)×26(D)：Display unit
φ5.5mm approx.：Cable diameter
1.8m approx.：Cable length
Weight 200g approx. (including batteries)
Included Accessories 9174 (Carrying case)
LR03(AAA)×2, Insruction manual

 

KEW 2200R

  • Print
Details
Category: Kyoritsu Indonesia
Published on Tuesday, 20 September 2016 10:37
Written by Super User
Hits: 2662

AC Digital Clamp Meters

KEW 2200R NEW

 

KEW 2200R
CE
 
• Ultra slim and lightweight Handy design
• Ø33mm Tear Drop Jaw easy to use in tight places
• 1000A AC Clamp Meter
• DMM function ACV, DCV, Ω, Continuity Buzzer
• Fuseless electronic protection on "Ω/Continuity Buzzer" up to 600V
• Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V

TRUE RMS φ33 MAX1000A ACA DCACV Resistance Continuitybuzzer DATAHOLD AutoPowerOff

Ultra Slim and lightweight Handy design / Current DMM function

 

AC A 40.00/400.0/1000A (Auto-ranging)
±1.5%rdg±5dgt (45 - 65Hz)
±2.0%rdg±5dgt (40 - 1kHz)
AC V 4.000/40.00/400.0/600V (Auto-ranging)
±1.8%rdg±7dgt (45 - 65Hz)
±2.3%rdg±8dgt (65 - 500Hz)
DC V 400.0mV/4.000/40.00/400.0/600V (Auto-ranging)
±1.0%rdg±3dgt (400mV range is excluded.)
Ω 400.0Ω/4.000/40.00/400.0kΩ/4.000/40.00MΩ (Auto-ranging)
±2.0%rdg±4dgt (0 - 400kΩ)
±4.0%rdg±4dgt (4MΩ)
±8.0%rdg±4dgt (40MΩ)
Continuity buzzer buzzer sounds below 50±30Ω
Conductor size Ø33mm max.
Applicable standards IEC 61010-1
CAT IV 300V / CAT III 600V Pollution degree 2 (AC A),
CAT III 300V / CAT II 600V Pollution degree 2 (AC/DC V)
IEC 61010-031, IEC 61010-2-032, IEC 61326 (EMC),
EN 50581 (RoHS)
Power source R03/LR03 (AAA) (1.5V) × 2
*continuous measuring time:
approx. 120 hours (Auto power off: approx. 10 minutes)
Dimensions 190(L) × 68(W) × 20(D)mm
Weight Approx. 120g (including batteries)
Included Accessories 7107A (Test leads), 9160 (Carrying case), R03 (AAA) × 2,
Instruction Manual
Optional Accessories 8008 (Multi-Tran)

 

KEW 2007R

  • Print
Details
Category: Kyoritsu Indonesia
Published on Tuesday, 20 September 2016 10:31
Written by Super User
Hits: 2519

AC Digital Clamp Meters

KEW 2007R NEW

 

KEW 2007R
CE
 
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.1A resolution
• Accurate reading with True RMS
　600/1000A auto-ranging
• Long battery life
• Safety Standard
　 IEC 61010-1 CAT IV 300V / CAT III 600V

TRUE RMS CAT4　300V CAT3　600V φ33 MAX1000A ACA DCACV Resistance ContinuitybuzzerDATAHOLD AutoPowerSave

 

 

 

AC A 600.0/1000A (Auto-ranging)

±1.5%rdg±4dgt [45 - 65Hz]
±2.0%rdg±4dgt [40 - 400Hz]
AC V 600.0V

±1.2%rdg±3dgt [45 - 65Hz]
±1.5%rdg±4dgt [40 - 400Hz]
DC V 600.0V

±1.2%rdg±3dgt
Ω 600.0Ω/6.000kΩ (Auto-ranging)

±1.3%rdg±5dgt (600Ω)
±2.0%rdg±3dgt (6.000kΩ)
Continuity buzzer 600Ω (Buzzer sounds below 90Ω)
Conductor size φ33mm max.
Applicable standards IEC 61010-1 CAT IV 300V, CAT III 600V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61010-2-033,
IEC 61326-2-2, IEC 60529, EN 50581 (RoHS)
Power source R03/LR03 (AAA) (1.5V) × 2
Continuous measuring time Approx.170 hours (when R03 is used)
(Auto power save : approx. 10 minutes)
Dimensions 204(L) × 81(W) × 36(D)mm
Weight 220g Approx. (including batteries)
Included Accessories 7066A (Test leads)
9079 (Carrying case)
R03 (AAA) × 2,
Instruction Manual
Optional Accessories 8008 (Multi-Tran)

 

KEW 2117R

  • Print
Details
Category: Kyoritsu Indonesia
Published on Tuesday, 20 September 2016 10:33
Written by Super User
Hits: 3177

AC Digital Clamp Meters

KEW 2117R NEW

 

KEW 2117R
CE
 
• Fully Safety jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS
60/600/1000A auto-ranging
• Long battery life
• Safety Standard
IEC 61010-1 CAT IV 300V / CAT III 600V

TRUE RMS CAT4　300V CAT3　600V φ33 MAX1000A ACA DCACV NCV ResistanceContinuitybuzzer DATAHOLD AutoPowerSave

 

 

 

AC A 60.00/600.0/1000A (Auto-ranging)
±1.5%rdg±4dgt [45 - 65Hz]
±2.0%rdg±5dgt [40 - 1kHz]
AC V 60.00/600.0V (Auto-ranging)
±1.0%rdg±2dgt [45 - 65Hz] (600V)
±1.5%rdg±4dgt [40 - 1kHz]
DC V 60.00/600.0V (Auto-ranging)
±1.0%rdg±3dgt (60V)
±1.2%rdg±3dgt (600V)
Ω 600.0Ω/6.000/60.00/600.0kΩ (Auto-ranging)
±1.0%rdg±5dgt (600Ω)
±2.0%rdg±3dgt (6/60/600kΩ)
Continuity buzzer 600Ω
Conductor size Ø33mm max.
Applicable standards IEC 61010-1 CAT IV 300V, CAT III 600V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61010-2-033,
IEC 61326-2-2, IEC 60529(EMC), EN50581 (RoHS)
Power source R03/LR03 (AAA) (1.5V) × 2
Continuous measuring time Approx.170 hours (Auto power save : approx. 10 minutes)
Dimensions 204(L) × 81(W) × 36(D)mm
Weight 220g Approx. (including batteries)
Included Accessories 7066A (Test leads)
9079 (Carrying case), R03 (AAA) × 2,
Instruction Manual
Optional Accessories 8008 (Multi-Tran)

 

KEW 2510

  • Print
Details
Category: Kyoritsu Indonesia
Published on Tuesday, 20 September 2016 10:29
Written by Super User
Hits: 1419

DC Milliamp Clamp Logger

KEW 2510NEW

 

KEW 2510
CE
 
• Measures 4 to 20 mA instrumentation and process signals without breaking the loop
• Memory function stores up to 192000 data useful for monitoring the signals over time and fault finding
• Transfer data to PC via Bluetooth
• Top class measurement 0.2% accuracy
• ∅6mm clamp jaw easy to use in tight places
• LED light for illuminating the measurement spot
• Analog output terminal to allow the connection to a recorder or a digital multimeter

φ6 DCA Backlight DATAHOLD AutoPowerOff OutPut Bluetooth External

 

 

AC A 20/100mA(Auto ranging)
±0.2%rdg±5dgt (0.00mA - 21.49mA)
±1.0%rdg±5dgt (21.0mA - 120.0mA)
Conductor size φ6mm max.
Analog output Recorder: DC1000mV against DC100mA
Applicable standards IEC 61010-1, Pollution degree 2
IEC 61010-2-032, IEC 61326-1(EMC)
IEC 60529 IP40, EN50581(RoHS)
Operating temperature & humidity range -10 - +50℃ <85%
Storage temperature & humidity range -20 - +60℃ <85%
Power source R6/LR6(AA) (1.5V) x4 (Alkaline LR6 is recommended.)
External supply (AC adapter MODEL8320)
communication interface Bluetooth Ver2.1+EDR Class2
Dimensions / Weight 111(L)x61(W)x46(D)mm : Display unit
104(L)x33(W)x20(D)mm : Sensor
700mm : Sensor Cable
Approx. 310g(including batteries)
Included Accessories 8320(AC adapter), KEW Windows for 2510(Software)
9096(Carrying case), LR6(AA)x4, Instruction manual
Software installation manual
Optional Accessories 7256(Output cord)

 

More Articles...

  1. KEW 2500
  2. Multimeters
  3. MODEL 1110
  4. KEW 1109S