Phase Indicator
Kyoritsu Indonesia - Jual Kyoritsu Phase Indicator
Non-Contact Safety Phase Indicator
-
KEW 8035
Safe Testing without direct contact with live wires!!
• New technology permits safe testing, without the need of direct contact between probes and live wires.
• The insulated crocodile clips can clip insulated cables from φ2.4 to 30mm.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.-
<li><img src="http://www.kew-ltd.co.jp/files/mark/cat4-600v.png" border="0" alt="CAT4 600V" height="31" />
Phase Indicators
-
MODEL 8030
• Digital Phase Indicator with open phase checker.
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
• Small, lightweight, and portable. -
MODEL 8031
• Digital Phase Indicator with open phase checker.
• Phase indicator designed to check the presence of open phase and also the phase
sequence by LED and buzzer at the same time.
•Small, lightweight, and portable. -
KEW 8031F
• KEW8031F is designed to check phase sequence.
Lamps provided on the unit will also tell you if a phase is open.
• Can check a wide range of 3-phase power source from 100V to 600V.
Sealed against dust, the unit ensures trouble-free performance.
• Small, Lightweight and portable.
Designed for maximum ease of operation and ruggedness.
• No exposed metal parts, Safety features are incorporated including the instant push button switch operation.
KEW 6201A
Jual Kyoritsu Portable Appliance Tester KEW 6201A
Portable Appliance Testers
KEW 6201A
The KEW 6201A is a portable appliance tester, performing four functions to ensure the Safety of ClassI and ClassII appliances. And also can measure the mains voltage.
Readings are displayed on a large liquid crystal display (LCD) below which are four LEDs which unambiguously display a pass or fail indication for threshold values dictated by AS/NZS 3760.
This instrument is suitable for performing tests as required by the following standards.
AS/NZS 3760 In-service safety inspection and testing of electrical equipment.
Test Function
| Function | Tests of contents |
|---|---|
| Test ⅠClass | Protective conductor resistance Insulation (250V or 500V) |
| Test ⅠSELECT Switch + Class | Protective conductor resistance Leakage Current test |
| TestⅡClass | Insulation (250V or 500V) |
| TestⅡSELECT Switch + Class | Leakage Current test |
| Extension Leads test | Protective conductor resistance Insulation P/N-PE Polarity |
| SELECT Switch + Extension Leads test | Protective conductor resistance Leakage Current test |
| Leakage Current Test | Leakage current measurement |
RPE 20Ω Protective Conductor Resistance Test
| Measuring range | 0 - 15.00Ω |
|---|---|
| Resolution of measurement | 10mΩ |
| Open circuit voltage | < AC 12V |
| Measuring current | 10A AC nominal value |
| Accuracy | ±3%rdg±5dgt |
RINS 200MΩ Insulation Resistance
| Rating | 250V/20MΩ | 500V/20MΩ |
|---|---|---|
| Measuring range | 0 - 19.99Ω | |
| Resolution of measurement | 10kΩ | |
| Output voltage | 250V DC (+20%/-10%) @1MΩ | 500V DC (+20%/-10%) @1MΩ |
| Short circuit current | 2.5mA DC or less | |
| Accuracy | ±2%rdg±3dgt | |
Leakage Current Test
| Measuring range | AC 0.1 - 19.99mA |
|---|---|
| Resolution of measurement | 0.01mA |
| Examination time | Max 15 seconds |
| Accuracy | ±3%rdg±5dgt |
AC VOLT Mains Voltage Check
| Measuring range | 207 - 264V |
|---|---|
| Resolution of measurement | 1V |
| Accuracy | ±2%rdg±3dgt |
General
| Supply voltage | 240V±10% |
|---|---|
| Frequency | 50Hz±1% |
| Applicable standards | IEC 61010-1 CAT III 300V Pollution Degree2 IEC 61326-1 (EMC) |
| Dimensions | 167(L) × 185 (W) × 89 (D) mm |
| Weight | 1.2kg (only the instrument body) |
| Included Accessories | 7123 (Power cord [AU]) 7129A (Test leads with alligator clip) 7161A (Flat test prod [black]) 7140 (Adapter for exntesion cord) 9147 (Cord case) 9121 (Shoulder strap) Instruction manual |
| Optional Accessories | 7121B (Distribution board test leads) |
KEW 4140
Jual Kyoritsu LOOP/PFC/PSC Testers KEW 4140
LOOP/PFC/PSC Testers
KEW 4140
• Anti-Trip Technology for complete trip free Loop testing on all RCDs rated 30mA and above.
• Dual Display allows simultaneous measurements like Loop & PFC/PSC.
• Two wire connection for Loop L-L, L-N and PSC testing is possible.
• Phase rotation, Voltage and Frequency measurements.
• Lock-down test button for 'hands free' testing with auto-start operation.
• Display and front panel keyboards with Backlight to be visible in dark places.
• Water and Dust proof (IP54)
Loop Impedance
| Function | L-PE ATT OFF | L-PE ATT ON | L-N / L-L |
|---|---|---|---|
| Rated Voltage | 230V (50/60Hz) | L-N: 230V (50/60Hz) L-L: 400V (50/60Hz) |
|
| Operating Voltage | 100 - 280V (45 - 65Hz) | 100 - 500V (45 - 65Hz) | |
| Range (Auto-Ranging) | 20/200/2000Ω | 20/200/2000Ω (L-N<20Ω) |
20Ω |
| Nominal Test Current at 0Ω External Loop: Magnitude/Duration at 230V | 20Ω: 6A/40ms 200Ω: 2A/20ms 2000Ω: 15mA/500ms |
L-N: 6A/60ms N-PE: 10mA/approx.5s |
20Ω: 6A/20ms |
| Accuracy | ±3%rdg±4dgt (*1) | ±3%rdg±6dgt (*1) | L-N: ±3%rdg±4dgt L-L: ±3%rdg±8dgt |
PFC (L-PE) / PSC (L-N / L-L) (*2)
| Function | PFC | PFC (ATT) | PSC |
|---|---|---|---|
| Rated Voltage | 230V (50/60Hz) | L-N: 230V (50/60Hz) L-L: 400V (50/60Hz) |
|
| Operating Voltage | 100 - 280V (45 - 65Hz) | 100 - 500V (45 - 65Hz) | |
| Range (Auto-Ranging) | 2000A/20kA | 2000A/20kA (L-N<20Ω) | 2000A/20kA |
| Nominal Test Current at 0Ω External Loop: Magnitude/Duration at 230V | 20Ω: 6A/40ms 200Ω: 2A/20ms 2000Ω: 15mA/500ms |
L-N: 6A/60ms N-PE: 10mA/approx.5s |
20Ω: 6A/20ms |
Phase Rotation
| Operating Voltage | 50 - 500V, 45 - 65Hz |
|---|---|
| Remarks | Correct phase sequence: displayed "1.2.3" and  markReversed phase sequence: displayed "3.2.1" and mark |
Volts
| Function | Volts | Frequency |
|---|---|---|
| Measuring range | 0 - 500V | 45 - 65Hz |
| Accuracy | ±2%rdg±4dgt | ±0.5%rdg±2dgt |
| Applicable standards | IEC 61010-1 CAT III 300V (500V L to L), IEC 61010-031, IEC 61557-1, 3, 7, 10, IEC 60529 (IP54), IEC 61326 (EMC) |
|---|---|
| Power source | 1.5V AA batteries × 6 *Use of alkaline batteries (LR6) is recommended. |
| Dimensions | 84 (L) × 184 (W) × 133 (D) mm |
| Weight | 860g (including batteries) |
| Included Accessories | Main cord (*3) Distribution board test lead (*4) 9155 (Shoulder strap) 9156 (Soft case) LR6 (Battery) × 6, Instruction manual |
KYORITSU Products
Guests Online
We have 144 guests and no members online
Call us at:
Email us at:
